Dodge Charger Forum banner

6.4l

  1. Charger Performance Mods - Engine - 6.4L HEMI
    So I finally decided to pull the trigger on upgrading my 2018 Scat Pack. As the title says, had a 2.9L Whipple Installed. Result: 623hp/577lbft at the wheels. Absolutely insane and scary at the same time!
  2. 2019 Dodge Charger Forum
    So I finally put in my Mishimoto coolant expansion tank on my 2019 Daytona 392. I was attempting to bleed the air out of the coolant lines but could not for the life of me find the air bleeder valve for the coolant system. I searched the forums and found pictures showing the location for the...
  3. Charger Performance Mods - Engine - 6.4L HEMI
    Looking to buy a catch can to prevent engine issues. My price range is below $200. Right now I’ve got my eyes on the mishimoto direct fit one for the 6.4l currently at $190 and the custombiletstore one for the 6.4. The billetcustoms one requires the “Z” bracket where as the mishimoto does not as...
  4. Dodge Charger Parts for Sale - Trade - WTB.
    I have a Borla Atak exhaust for sale. It's used, but in very good condition. It fits a 2015-16 Charger Scat Pack/SRT. Asking $900 OBRO. The item is located in South Eastern Massachusetts.
  5. Dodge Charger General Discussion
    Mopar lovers! Please help! I am buying 6.4l SRT8 manifolds for my 5.7 RT. I know that after the headers, I’ll also need new cats for the bigger size so of course it would be easiest to get the SRT8 cat converters. My question is: Can I put on SRT8 manifolds, followed by a set of SRT cats off of...
  6. 2015 Dodge Charger Forum
    I have been researching doing the 6.4L manifold swap to a 5.7L and I was wondering what all it entailed and what parts are needed for 2015? All the threads I have found are all for the 2014 and under, and I was wondering if anything changes for the 2015 model? Didn't know if anything changed...
  7. Dodge Charger Parts for Sale - Trade - WTB.
    I have a 274 cam and the necessary parts to install including phase limiter, 6.1 springs and isolators and forged rods. Brand new in box was going to install but had some unexpected expenses for my boys and they come before toys. Works with 09+ 5.7 and 6.4 hemis with vvt. Shoot me an offer 573...
  8. Dodge Charger SRT8 General Discussion
    I just hit 29000 miles and pulling out of my driveway the cel came on and it was P0305. Cylinder 5 misfire. I cleared the code and drove a short distance to the store and noticed the hemi tick was louder and didn't go away after it warmed up and the idle was a little rough. The cel didn't come...
  9. Charger Performance Mods - Engine - 6.4L HEMI
    Will the LMI hammer fit the 6.4? I'm on the fence about this LMI hammer or the speed logix carbon intake I like the look of the hammer but it is listed on the sight I am about to buy it from as "LMI Carbon Fiber Hammer CAI 05-13 Challenger, Charger, 300, Magnum 5.7L, 6.1L" doesn't say 6.4L :(...
  10. Charger Performance Mods - Engine - 5.7L HEMI
    Well lets see if I can't make my first post the n00b post of the year here.. Have a couple inquiries, but first lets start off here. I have a 06 RT (My first) that I've done quite a few things to. -JBA long tube headers -JBA mid pipes w/o cats -JBA catback exhaust -aFe stage II CAI -BBK 90mm TB...
  11. ChargerForumZ.com Polls!
    This is mainly for the SRT owners but everyone is welcome to join in the fun. I know a lot of members said they like the Challenger but they want to keep to 4 doors. Well I want to know if the 2009 SRT8 Charger came out with a 6.4L Hemi, who's going to trade up? Lets say the MSRP $49,900 I...
Top