Search Results for ‘cam’

I just got a 2015 dodge charger rt and want to add a cam shaft, any advice on quality cams or any supporting mods I would need?

Ive got a 2012 dodge charger rt. Just did a cam and lifter swap, while doing so I changed the factory headers to catless bbk long tubes, I have the upstream O2 sensors threaded into the headers where they go, but I have yet to have the exhaust Welded to them, now due to this I have not...

Hey all! i have a fairly stock 6.1 it just has a cat delete, and its straight piped all the way back. Right now its making 380rwhp since the last time I tuned. I was looking to install a new cam but I want a mix between both a change in tone so a big lopey cam and also a good horsepower...

Hi all, I've got a 2014 Charger pursuit with the 5.7 Hemi. I've been researching the crap out of doing the 392 cam swap as it is a cheaper option and the main one I'm comfortable with as my engine is only 60k miles and runs perfect and I don't want to change too much (I'm also on a budget, I'm...

First and only mod to date, Tazer. Too many good options to list. Definitely worth the cost. Before Tazer, I pulled over to change address on nav and while doing that some random (not popo) starts tapping my driver side window - not happening again - Tazer allows passenger to make changes...

Hello, I'm Looking for paddle shifters and backup camera for my 2017 Dodge Charger SXT EDIT: Camera already bought

The specs are in the photo. Had it built, but never installed. Located in South Jersey east of Phila. Shipping is possible if buyer pays for shipping. Ed

I have been researching doing the 6.4L manifold swap to a 5.7L and I was wondering what all it entailed and what parts are needed for 2015? All the threads I have found are all for the 2014 and under, and I was wondering if anything changes for the 2015 model? Didn't know if anything changed...

I've been looking into best bang- for- buck modifications. I've looked at the 6.4L cam swap, the 266, and the 270. To my knowledge, the 6.4 swap would require swapping out cam, springs etc. Whereas the 266 or 270 could retain the stock springs, reduce labor, and net higher gains than the 6.4...

A few months back I was blessed with being able to purchase my 2013 Charger SRT8.. at the time I figured "I'll just leave it stock". Well that was never going to last :4-dontknow: so I started figuring out what I wanted to do first. Just a few simple modifications to get this car to a level...

Was able to get my SRT8 to the shop last night for a baseline dyno run. Numbers were far better than I had predicted. Current Mods: JBA Longtubes (w/ high flow cats) LMI Intake 180 Tstat Johan Tune https://www.youtube.com/watch?v=Z0PGXnUZG2U This build is fairly simple. Just wanting a...

hi guys, I've got a flowtech streetbeast cam, ported heads and all the hardware to do the project. Before I start, does anybody have any links to a "step by step" type guide? I've done projects like this on LS motors but this would be my first Hemi. I'm a bit paranoid about missing a step...

Im aware of the arrington cams have anyone installed on a 2011 from my research its about 40 more HP without anyother mods!!!!!

I was going to redo my engine but had a change of heart. I'm putting up for sale my 2006 5.7 Longblock minus timing cover and oil pan for $800. My trusted mechanic looked at it with his equipment and told me I fell victim to a stuck valve and damaged piston. The deal is worth it in parts alone...

I am seeing if there is any interest out there in my 381, 2006 based stroker, it will be sold as a long block. FIRST OFF THERE IS NOTHING WRONG WITH THIS ENGINE! Willing to seperate headers/exhaust/block - not seperating heads from the block. Just going a different route! It has NGK plugs...

Hello, I'm going to install a tomahawk cam in my superbee this weekend. I'm not going to take the heads off, so I was wondering if anybody knew if the lifters would fall in when the cam comes out? Never been inside a hemi before so thought id ask, I dont want an unexpected surprises. Thank...