Dodge Charger Forum banner

install

  1. Dodge Charger General Discussion
    Hello, I want to upgrade my headlights I dont mind dropping $300-$400. I really like the look of the LED headlights like these "2LHP-CHG11JM-TM" (Google). My issue is im not super car savy. The stock headlights suck, they are not bright at all, I bought some new bulbs but couldnt figure out...
  2. 2015 Dodge Charger Forum
    hello! It's my first post here, anyway I have bought the cool "typeS" 8" app-controlled smart light bar at my locat autozone and wanted to install the in place of the fog lights. For the se drivers you know there is no actual fog light just the in-lay for one. Does anyone know a way or even a...
  3. 2014 Dodge Charger Forum
    I have a 2014 R/t with the re2 sat etc... I am looking at upgrading to an RB5. There are two different part numbers that come up when you do a search for a used rb5 5091367AD and 6821055AE I do not know which one will work properly. The dealer says that the AD was only in 2013 models. Also do I...
  4. 2013 Dodge Charger Forum
    Hello My Mopar Friends, I'm looking to have a cat back custom exhaust system installed on my 2013 Dodge Charger SRT8 Superbee. I am interested in specifically the Zoomers. I was hoping someone could direct me to a location near Omaha Ne that could do this work. I have tried calling a few...
  5. 7th Gen Dodge Charger
    I've seen a few Ipad installs, but none quite like this... (Skip to 1:50) https://www.youtube.com/watch?v=IeVc2X-tzOU Blew my freakin' mind!!!
  6. Custom Charger Interior and Exterior Lighting
    This is my second thread on this topic, my first thread got pretty big and the information I've given over the year is now pretty hard to find. If you're looking to install HIDs and/or want to put Spyder Housings in your Charger you should definitely have a read.. I've learned a lot since that...
  7. Charger Performance Mods - Engine - 5.7L HEMI
    Hi everyone, I am in desperate need of help from anyone who has done a set of long theb headers in their charger. Specifically, in a 2007 5.7. I have a set of Kook's long tube headers I purchased with the intention that me and my buddy could install them over a long Saturday. Saturday came and...
  8. 6th Gen Dodge Charger
    I have the 6 disc cd changer (rak I believe). I went to hard wire my Sony XAV 63, and realize there's no front/back speaker wires - just left and right audio. Which I then learned I have the factory amp and the 6x9s in the trunk. So, my question is - What adapter harness do i need so I can...
  9. Custom Charger Exterior Mods - Body
    Here is a write up for all of the SE/SXT folk with bare trunk lids who would like a SRT Spoiler. If you have a R/T with pre existing holes here's the thread you want: http://www.chargerforumz.com/showthread.php?t=145458&highlight=SRT+spoiler Here is my spoiler and the hardware it came with...
  10. 2012 Dodge Charger Forum
    i want to buy a set of pacesetter long tube headers, but i know im going to need other parts as well. do i just have to buy new midpipes? or is there more? like an x-pipe? im really not sure wat else i will need. the only other thing i have on the car is a borla cat back. any help on what else...
  11. 2012 Dodge Charger Forum
    Dynamat cuts! LOL I forgot how much this sh!t cuts you up! :hah: oh well pulled the trunk lid liner and dynamatted that puppy up! took about 45mins.. the worst part was finding the holes for the wire clips, should have made a template.. got them back in tho! :TU: So I got about 3 good slashes...
  12. 2012 Dodge Charger Forum
    So I am considering (read will, saving money) buying the Valentine 1 radar device. I want to mount it under my mirror, but I am having a seriously hard time figuring out what will work, or which bracket to buy. I have seen some from Blendmount for almost 80 (what?!?) then amazon has one for...
  13. Custom Charger Interior and Exterior Lighting
    Does anyone know if it s better to bake seperate and rebake, or Bake seperate, remove the glue and hit the housing with black and clear silicone sealant? If anyone out the in the Z world can help me out. Oh yea my 6 ring halos came in yesterday!!!!!! Good ol Flashtech and the Group buy. :D:D:D
  14. 2011 Dodge Charger Forum
    So, I broke down and accepted a Cobra iRadar from my credit card rewards points (I wouldn't pay for one ever). I have windshield mounted the unit right in front of mirror as to stay behind the mirror and out of sight for safety reasons. Since I have one I would like to keep the wire out of the...
  15. Custom Charger Interior and Exterior Lighting
    I just finished installing BLUE SMD LED bulbs into every stock bulb slot inside and out. Tell me what you guys think, these things are hella bright and the pics dont quite do justice but you get the idea.
  16. 7th Gen Dodge Charger
    I want to mount my iPad 2 into my dash or some other way, I want to look somewhat factory, no mounts. Anyone accomplished this? Pics??
  17. Dodge Charger Chassis - Suspension
    Just picked up an SLP Line Lock kit from Speedlogix in Florida and installed it. It is pretty simple but I thought I would do a short write up on the install. SLP is really good at putting the kit together. Writing instructions... well, let's just say it's not what they are the best at... :) I...
  18. Custom Charger Interior and Exterior Lighting
    FINALLY got around to installing the v2 scanner in the hood scoop, and wanted to share a video. I love how they look, and the crappy video quality does them no justice. Sorry for the poor video, I hope to get a HD camera soon for some better videos. It's kind of long, but I wanted to try an...
  19. 6th Gen Dodge Charger
    BIG THANKS!:TU: This is an awesome place to go for info, and there are some extremely helpful people on here. I haven't come across one person who brushed me off, or acted like I was a waste of their time. It's so refreshing to see a forum where there's smart, helpful members who won't blast...
  20. 6th Gen Dodge Charger
    Ok, I upgraded my speakers to 2- 6.5 rockford fosgate punch p1s652 for the front and 2 rockford fosgate 6x9s p1694 for the rear and i am addin a 8 inch kicker sub 10c84 with a Jensen 760 watt amp. Specs are: 6.5s- rms 55 watts peak 110 4 ohm 6x9s- rms 75 watts peak 150 watts 4ohm 8inch sub...
Top