pentastar

Back in March, when it was about 35 degrees out, i was making about 310 peak hp and 245 peak torque. Now, when it's about 90 degrees out, I'm making about 260 peak hp, and 210 peak torque. In the morning when it's about 70 out, I make about 275 peak hp, and about 220 torque. I have a diablo...

What modifications I can do to the car (V6)to make the car go just a little bit faster?

2011 Charger SE, 3.6 pentastar, 5 speed, 99,000 miles These are the hp numbers being read off of the SRT performance pages All 3 of these number were when the engine was warm, and between 30 and 35 degrees Fahrenheit outside Factory tune with 15,000 mile old mopar air filter: 276 hp Factory...

I have an inTune i3 coming in the mail today. Do i need to unmarry my tazer before I use it? Also, what would the process be if i needed to go back to stock after everything is programmed. Do iI unmarry the tazer, use the i3, then reinstall the tazer? I have a 2011 Charger 3.6

I found an inexpensive ported throttle body online, but the part number matches up to a 206-2012 5.7l throttle body. It looks identical to the one on pentastars though. Would it work on my 2011 3.6?

Recently noticed a bit of valvetrain noise on my 2011 charger 3.6. It's not really loud or anything, but i can hear it with the hood open, and can barely hear it with the hood closed. Any ideas on what it could be?

I purchased a Tranzformer Gen II from ZAutomotive. I need to tap into wires that are in the TCM but I cannot seem to find it. According to what I've read online it should be right under the steering wheel column but it's definitely not there. Hopefully I'm not having a brainfart or something...

Hello Fellow Members, I have a 2013 Dodge Charger V6 and it's finally paid off :TU::TU:. Now, I do plan on supercharging my Charger but don't know which supercharger to choose from. My three options are Tidal-Wave, Ripp, & Sprintex. My question is which one should I go with? Has anyone...

Hey guys I just ordered my Overkill tune and intune on saturday and was just wondering how long it would take to get it. I have heard a few weeks to a month I just wanted some input on how long yours took. Also how much of an improvement will I see. I have heard some good things but im not...

What are good recommendations for brake pad brands. I dont need the best of the best, but I would like a good pad and rotor set up. I am coming in at 60,000 miles on my 13 V6. If you just google "good brakes" its all advertisements. Any help would be appreciated. Thanks.

I very recently bought a new 2015 Charger with the V6 Pentastar in it. At about 200 miles, I noticed a pretty audible tick coming from the engine compartment when I accelerate at lower speeds. It does it all the time, I think, but you can't hear it at highway speeds. More recently, it started...

Hey guys I don't know if this has been asked or not, but I wanted to know if the transmission from a 2014 sxt is the same as an r/t transmission. Im planning on doing a 5.7 swap from my 3.6L

Hey y'all. Had a couple questions. Who on here has the TidalWave blower for the 3.6? What tires do you have on yours, and on those do you have any squealing on takeoff? I read a couple older threads on other forums that say the blower has boost leaks and a leak through the PCV intake line...

Allpar posted an article yesterday about the 2016 Durango and Grand Cherokee getting the Pentastar Upgrade. Do you think the Charger's and 300's will get the upgrade too? My dad's '07 Durango has almost 200,000 miles and my dad wants to get a new daily driver and keep the Durango for hauling...

Hello Forum, Ok so I bought an oil catch can from UPR. I am now starting to regret if because they shipped me a good can but only one hose that if cut to proper length won't be long enough to get two. Second I notice that when I removed my stock PCV hose I need fittings to plug in the hose that...

Hello Forum, Ok so I bought an oil catch can from UPR. I am now starting to regret if because they shipped me a good can but only one hose that if cut to proper length won't be long enough to get two. Second I notice that when I removed my stock PCV hose I need fittings to plug in the hose that...

. Maximum Power for Challenger, Charger and Chrysler 300 Pentastar V6 3.6L Engines! Black intake system with Black Hex filter shown. This system will outperform any intake currently available for the 3.6! Rather than design a Challenger and Charger cold air intake system that simply achieves...

I'm selling my Mopar CAI for 2011-14 Dodge Chargers with the 3.6L Pentastar. I'm looking for $300. I would prefer to sell locally but I will ship it at the buyer’s expense. I am also selling a stock 3rd brake light without a backup camera for a 2011-14 Dodge Charger. I'm looking for $25 +...