Dodge Charger Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
170 Posts
Dont mix parts, use the whole junk yard shaft not just the one half.
When my u joint was bad i bought the new sfaft from a dealer, it's gone up a lot since then.
If it does fix the problem I'd try to find a place to replace the u joint in the original one. I saved mine to do that but hope I never have to.
 

·
Registered
Joined
·
170 Posts
Unfortunately the u joint isn’t able to be replaced in the 05-14 drive shafts from what I understand I do get the not mixing parts tho.. the guys I have been talking to about cutting me a new shaft don’t want to mess with the Non- Serviceable u joint of course lol I’m hoping the u joint is my issue I have replaced the center carrier bearing already and the sound is still here.. I noticed the u joint in the shaft has a slight bind to it so a shaft from the yard is a 50$ temp fix to hopefully tell me where to go from here.
It's not meant to be replaced but there are places around that claim to be able to do it. I never followed through with it so I have no first hand experience but for the cost of new driveshafts now it's something I'd look in to.
 
1 - 2 of 2 Posts
Top