[WrenchJeff]

Here you go, Trent.
Cylinder head:

• M-12 Bolts
  • Step 1 34 Nm (25 ft. lbs.)
  • Step 2 54 Nm (40 ft. lbs.)
  • Step 3 Turn 90°
• M-8 Bolts
  • Step 1 20 Nm (15 ft. lbs.)
  • Step 2 34 Nm (25 ft. lbs.)

Crankshaft pulley bolt spec is 129 ft. lbs.

Here`s the tightening sequence for the rocker shafts.

and torque specs:
195 inch pounds.

Trent, make sure you note INCH pounds. Not foot pounds. Realistically you can just tighten them by hand until they`re tight. Just be careful not to overtighten. You can strip the threads.

Here`s the valve cover sequence.

The torque specs are 70 INCH pounds.

Is there anyone over there helping you?

 

[WrenchJeff]

I`m not sure what roller you`re talking about. Can you take a pic?

 

[WrenchJeff]

Oh...the lifters. We just removed mine and reinstalled them when the new cam was in.

Either way works, trent.