Dodge Charger Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
54 Posts
Discussion Starter · #1 ·
Hey everyone. I have installed a new stereo in my charger the 7023b from amazon. i used a spare PAC C2R-CHY4 for my 2.7L 2010 charger se. as it turns out a portion of this module is unusable for my model as i dont have steering wheel controls. this in turn leaves me with no 12v accessory/illumination wire coming off the module to tie into. BUT I have it up and running, speakers wired in, 12v constant and all that. for the accessory/illumination problem i have run a manual on/off switch from the 12v constant to the 12v illumination wire on the deck.

I will be running the illumination/12v accessory from the deck to a fuse in order to get my on/off with the key. which fuse would be best to piggy back from.
 
1 - 1 of 1 Posts
Top