Dodge Charger Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter · #1 · (Edited)
I have the 6 disc cd changer (rak I believe). I went to hard wire my Sony XAV 63, and realize there's no front/back speaker wires - just left and right audio. Which I then learned I have the factory amp and the 6x9s in the trunk.

So, my question is - What adapter harness do i need so I can install the Sony XAV 63 and keep the factory amp and 6 speakers working properly?

Here's a diagram of my wiring and wire colors:

(My OEM harness only uses pins: 1,5,6,11,12,18b,19b,20b,21b, and 22)

Thanks in advance for any information,
Rick
 

Attachments

·
Registered
Joined
·
332 Posts
Awesome! Thank you!
you're welcome, there's another adapter you need to get the steering wheel buttons to work, I didn't buy it yet, but intend to shortly, I miss my buttons.

you will want the PAC SWI-RC control unit for that:
http://www.amazon.com/PAC-SWI-RC-St...TF8&qid=1399307352&sr=8-1&keywords=PAC+SWI-RC

there's also a good dash kit from metra that will make installing a breeze. the directions are worthless but it's fairly easy to figure out.
http://www.amazon.com/gp/product/B000K52D0K/ref=oh_details_o00_s00_i01?ie=UTF8&psc=1

good luck with your upgrade :)
 

·
Registered
Joined
·
4 Posts
Discussion Starter · #5 ·
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top